ProfiTap Provide Network Visibility Soultions Including TAPS and Packet Brokers For Network Analysis & Security
ProfiShark
ProfiShark helps network engineers get easy access to the network and capture every single packet with accurate timestamping. This results in high quality data that can be used for network analysis in packet analyzer software, like Wireshark, or stored directly to disk for later analysis.
ProfiShark helps you
Accurately design a high-capacity network based on your own needs and requirements. Features include:
- Quickly get packet-level insight
- Get trace files you can rely on
- Get Transparent and non-intrusive insight
- Get the timestamp accuracy you need
IOTA
IOTA’s combination of features in a single, compact device make it a complete network capture and analysis solution, and an essential addition to any network engineer’s toolkit.
More information on the IOTA can be found HERE
KEEP AN EYE ON YOUR NETWORK
Monitor hosts, top talkers, bandwidth, latency, TCP, UDP, IPv4, IPv6, VLAN, DNS and many more at a glance, using a premade set of comprehensive dashboards.
MONITOR NETWORK PERFORMANCE
Keep a close eye on the most essential performance metrics, retransmissions, packet loss, latency, throughput, availability, connectivity and more.
TRACK DOWN SECURITY FLAWS, AND PROTOCOL/APPLICATION USAGE
Full visibility over 200+ applications and protocols (DNS, HTTP, SSH, Office 365, Skype, Whatsapp, Netflix, etc.)
MONITOR REMOTE SITES & BRANCH OFFICES
Fully managed over HTTPS and with built-in VPN, it offers easy deployment and usage in any network topology.
Network Packet Brokers
The Profitap XX-Series and X2-Series Network Packet Brokers are high-end versatile solutions, bringing you the power and flexibility of network traffic management. All Profitap’s Network Packet Brokers are designed for aggregation, filtering and routing of multiple 10G/25G/40G/100G inputs, used in very high sustained bandwidth port monitoring and analysis scenarios.
Network Packet Brokers enhance the performance of network analysis and security tools, helping you solve application performance bottlenecks and troubleshoot problems on the network. This way you can benefit from greater monitoring and an improved return on investment.
A Network Tap sends copies of network traffic in both directions to a monitoring device such as an Intrusion Detection System (IDS) or statistics traffic generator. Network taps optimize monitoring, security, and storage by enabling access to network traffic, reliably and unobtrusively.
Ethernet TAPS
Profitap Ethernet TAPs seamlessly duplicate full-duplex 10M/100M/1G/10G traffic at wire speed. Our TAPs provide monitoring devices with traffic as if they were in-line, allowing them to view all 7 layers, including packets of all sizes and types, as well as low-level errors.
Fiber TAPS
Designed to enable flawless in-line monitoring of 1G, 10G, 40G and 100G fiber networks, our Fiber TAPs monitor all 7 OSI layers, packets of all sizes and types and low-level errors. They are non-intrusive, have no IP address and isolate monitoring devices from the network for complete security.
Regeneration TAPS
For situations where you want to monitor a single, critical network segment using several tools, a Regeneration TAP is what you need. Unlike an aggregation TAP, a regeneration TAP copies traffic from ONE network segment and sends it to MANY network monitoring tools simultaneously (1:M).
Replication TAPS
For situations where you want to monitor a single, critical network segment using several tools, a Replication TAP is what you need. A replication TAP sends copies of the network traffic to multiple monitoring tools simultaneously.
Bypass TAPS
Bypass TAPs can support active in-line network security and performance tools. They were designed to avoid the “single point of failure” problem with other security appliances.
ProfiSight
Networks often get overloaded even though there is more than enough bandwidth available. Upgrading your network for extra bandwidth is far from a good solution because it doesn’t solve the root cause of the problem. Something is eating up all the bandwidth, you have no idea what, and you need to find it out as quickly as possible.
To accurately track down these issues, you must know who is communicating with whom, with what devices – or end-points, and which protocol. In other words, you need to quickly and efficiently monitor the flow of the network.
ProfiSight gives you exactly that. By extracting directly from a PCAP file, you can take a look at both network flows and packet-based statistics. This way you get the best of both worlds.
Ready To Buy?
For more information on Network TAPS and how they help network professionals with monitoring, security and optimzation, visit our blog.
Receive your copy of the full ProfiTap portfolio. Enter you name and email and we will arrange for a brochure to be sent.
contact us to discuss your requirements
With Iris Networks, you’re in safe hands.
